Extra Large DCC Layout Brown Blue Wire Starter Kit-Track Bus/Droppers/Connectors

Description

Extra Large DCC Layout Brown Blue Wire Starter Kit-Track Bus/Droppers/Connectors
This product data sheet is originally written in English.
Extra Large DCC Layout Wire Starter Kit - Track Bus/Droppers/Connectors
Compatible with all DCC systems including Hornby, Bachmann, Gaugemaster, NCE and Digitrax
Each kit contains:
20m Brown 32/0.2 Large Track Bus Wire
20m Blue 32/0.2 Large Track Bus Wire
10m Brown 16/0.2 Dropper Wire
10m Blue 16/0.2 Dropper Wire
60 Quick Splice Connectors
The wire included in this Starter Kit would be enough to complete a model railway which is larger than 8ft by 4ft railway.
Should you require more wire, please contact us and we can provide an estimate for the amount of wire required.
Additional Wire and Connectors are available, as are smaller starter kits. Please see our other listings or visit our Ebay Shop.
32/0.2 is for medium or larger DCC layouts, where multiple throttles are to be used and/or any form of power booster is incorporated in the layout.
Dropper Wire is used in short lengths to link the track to the Track Bus.
These are connected together using the Quick Splice Connectors.
The Quick Splice Connectors are no solder IDC type.
To use, simply push the connector over the Bus Wire and push the Dropper Wire into the other hole. Close the metal splice with a pair of pliers and then fold the insulating clip over.
Dropper Wire is multi-strand 16/0.2 rated at 3A @ 70C with a 1.6mm outside diameter
Large Track Bus is multi-strand 32/0.2 rated at 6A @ 70C / 10A @ 25C with a 2.6mm outside diameter
CM3Models are experienced Railway Modellers and are always happy to offer help and advice both pre- and post- sales.
The wire included in this Starter Kit would be enough to complete a model railway which is larger than 8ft by 4ft railway. Additional Wire and Connectors are available, as are smaller starter kits. Please see our other listings or visit our Ebay Shop. 32/0.2 is for medium or larger DCC layouts, where multiple throttles are to be used and/or any form of power booster is incorporated in the layout. Dropper Wire is used in short lengths to link the track to the Track Bus.  These are connected together using the Quick Splice Connectors. The Quick Splice Connectors are no solder IDC type.  To use, simply push the connector over the Bus Wire and push the Dropper Wire into the other hole. Close the metal splice with a pair of pliers and then fold the insulating clip over. CM3Models are experie
MPN
Does Not Apply
Brand
cm3models
Product Type
Scenery/ Layout
EAN
9788885203341
Sub-Type
Construction