Excel Dryer XLERATOReco XL-BW-ECO Hand Dryer, No Heat, 110-120 Volt, White

Description

Excel Dryer XL-BW-ECO XLERATOReco Hand Dryer
The
XLERATOR
eco
™ is a new version of the Xlerator without the heating element. Please see the standard XLERATOR products with the heating element (#1 seller). The new
XLERATOR
eco
™ is the no heat version of the Xlerator. Typically schools or facilities buying large quantities of units may choose the no-heat version because installation costs are cheaper with the ability to install 3
XLERATOR
eco
™ hand dryers to one line and the electrical costs are reduced even further than the already energy efficient Xlerator. We still suggest the standard heated version (in most cases) which are always in stock and normally ship same day. We have plenty of experience with non heated units and typically customers prefer heated. The heated version dries slightly faster.
Our most popular choice for most customers is the standard XLERATOR with the heating element.
Guaranteed lowest Excel Dryer
XLERATOR
eco
™ pricing, anywhere! We are a trusted, Master Distributor for Excel Dryer. We will match or beat any online advertised price.
The
XLERATOR
eco
™ comes in the same variety of cover options as the standard Xlerator hand dryer
FEATURES
XLERATOR
eco
™ new 'No Heat' technology dries hands in 15 seconds using only 500 watts, making it the most environmentally-friendly way to dry hands on the planet.
Allows for the installation of up to 3
XLERATOR
eco
™ units on one 20 Amp circuit significantly reducing installation costs and time.
XLERATOR
eco
™ continues Excel Dryer’s commitment to providing the most energy-efficient hand dryers with the same proven performance, reliability and durability expected from XLERATOR®.
XLERATOR
eco
™ sets another new industry standard in green innovation and sustainability, and allows facilities to use even less energy than ever before.
SPECIFICATIONS
Dimensions: 11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP (298 MM LG. X 322 MM HIGH X 170 MM DEEP)
Weight: 16 LBS. (7.3 KGS.)
XLERATOR
eco
™ Spec Sheet
CONSTRUCTION
Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.
Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.
All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.
Entire mechanism shall be internally grounded.
MECHANISM
Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).
Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.
XLERATOR
eco
™ Technical Data Sheet
LIMITED WARRANTY
The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.